A droplet digital PCR chip with passive bubble removal for absolute nucleic acid quantification

Droplet digital polymerase chain reaction (ddPCR) is an extremely sensitive method for the precisely determining the concentration of target nucleic acids. However, air bubbles between droplets during amplification can cause significant droplet loss and decreased accuracy in results. In the present study, an all-in-one microfluidic chip that integrates emulsification, passive bubble removal, droplet monolayer storage, on-chip nucleic acid amplification, and droplet fluorescence signal readout is proposed. The integrated passive bubble removal structures automatically complete the trapping and guiding of the bubbles, ensuring that the droplets do not touch the bubbles during amplification and thus is not lost. The ddPCR device with optimized key parameters proved to be effective and efficient by completely removing bubbles between droplets and having a dead volume of less than 1 %. The ability of the ddPCR chip to accurately quantify nucleic acids was evaluated by measuring plasmids with the SARS-CoV-2N gene at concentrations ranging from 10 to 50 000 copies/μL. The innovative ddPCR device satisfies the requirement for accurate nucleic acid quantification and is expected to accelerate the popularity of dPCR due to its low processing difficulty, ease of use and high robustness.

Digital PCR Discriminates between SARS-CoV-2 Omicron Variants and Immune Escape Mutations.

As severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) continues to evolve, mutations arise that will allow the virus to evade immune defenses and therapeutics. Assays that can identify these mutations can be used to guide personalized patient treatment plans. Digital PCR (dPCR) is a fast and reliable complement to whole-genome sequencing that can be used to discriminate single nucleotide polymorphisms (SNPs) in template molecules. Here, we developed a panel of SARS-CoV-2 dPCR assays and demonstrate its applications for typing variant lineages and therapeutic monoclonal antibody resistance. We first designed multiplexed dPCR assays for SNPs located at residue 3395 in the orf1ab gene that differentiate the Delta, Omicron BA.1, and Omicron BA.2 lineages. We demonstrate their effectiveness on 596 clinical saliva specimens that were sequence verified using Illumina whole-genome sequencing. Next, we developed dPCR assays for spike mutations R346T, K444T, N460K, F486V, and F486S, which are associated with host immune evasion and reduced therapeutic monoclonal antibody efficacy. We demonstrate that these assays can be run individually or multiplexed to detect the presence of up to 4 SNPs in a single assay. We perform these dPCR assays on 81 clinical saliva SARS-CoV-2-positive specimens and properly identify mutations in Omicron subvariants BA.2.75.2, BM.1.1, BN.1, BF.7, BQ.1, BQ.1.1, and XBB. Thus, dPCR could serve as a useful tool to determine if clinical specimens contain therapeutically relevant mutations and inform patient treatment. IMPORTANCE Spike mutations in the SARS-CoV-2 genome confer resistance to therapeutic monoclonal antibodies. Authorization for treatment options is typically guided by general trends of variant prevalence. For example, bebtelovimab is no longer authorized for emergency use in the United States due to the increased prevalence of antibody-resistant BQ.1, BQ.1.1, and XBB Omicron subvariants. However, this blanket approach limits access to life-saving treatment options to patients who are otherwise infected with susceptible variants. Digital PCR assays targeting specific mutations can complement whole-genome sequencing approaches to genotype the virus. In this study, we demonstrate the proof of concept that dPCR can be used to type lineage defining and monoclonal antibody resistance-associated mutations in saliva specimens. These findings show that digital PCR could be used as a personalized diagnostic tool to guide individual patient treatment.

Medical diagnostic value of digital PCR (dPCR): A systematic review

Digital polymerase chain reaction (dPCR) is an emerging technique for the absolute quantification of target nucleic acids. dPCR got attention as a precise quantification tool in preclinical research, particularly when used to detect genetic mutations and result in highly precise measurements. In dPCR, the statistic of Poisson distribution was followed for the random distribution of molecules in different partitions, which is essential for dPCR quantification. Amplified target sequences in different partitions are identified by fluorescence and each partition functions as a separate PCR microreactor. Without the need for calibration, the percentage of PCR-positive partitions is sufficient to estimate the concentration of the target sequence. The present revolution in digital quantification was made possible by advancements in microfluidics, which provided effective partitioning techniques. In this paper, the contrast of the underlying ideas of quantitative real-time PCR with dPCR for the measurement of nucleic acids quantity Polymerase chain reaction (q-PCR). This review study briefly introduced the background of dPCR and compared different types of PCR, particularly the quantity of real-time qPCR and digital PCR. The fundamental concept of dPCR is also explained and also briefly compares the advantages of dPCR over qPCR and analyzes the applications of dPCR as a diagnostic tool for cancer and different types of viral species.

Rapid Single-Round Pool Testing of Infectious Disease Enabled by Multicolor Digital Melting PCR.

Pooled nucleic acid amplification test is a promising strategy to reduce cost and resources for screening large populations for infectious disease. However, the benefit of pooled testing is reversed when disease prevalence is high, because of the need to retest each sample to identify infected individual when a pool is positive. Split, Amplify, and Melt analysis of Pooled Assay (SAMPA) is presented, a multicolor digital melting PCR assay in nanoliter chambers that simultaneously identify infected individuals and quantify their viral loads in a single round of pooled testing. This is achieved by early sample tagging with unique barcodes and pooling, followed by single molecule barcode identification in a digital PCR platform using a highly multiplexed melt curve analysis strategy. The feasibility is demonstrated of SAMPA for quantitative unmixing and variant identification from pools of eight synthetic DNA and RNA samples corresponding to the N1 gene, as well as from heat-inactivated SARS-CoV-2 virus. Single round pooled testing of barcoded samples with SAMPA can be a valuable tool for rapid and scalable population testing of infectious disease.

Nanomaterials and Biosensing Technology for the SARS-CoV-2 Detection

The outbreak of corona virus disease 2019 (COVID-19) has aroused great attention around the world. SARS-CoV-2 possesses characteristics of faster transmission, immune escape, and occult transmission by many mutation, which caused still grim situation of prevention and control. Early detection and isolation of patients are still the most effective measures at present. So, there is an urgent need for new rapid and highly sensitive testing tools to quickly identify infected patients as soon as possible. This review briefly introduces general characteristics of SARS-CoV-2, and provides recentl overview and analysis based on different detection methods for nucleic acids, antibodies, antigens as detection target. Novel nano-biosensors for SARS-CoV-2 detection are analyzed based on optics, electricity, magnetism, and visualization. In view of the advantages of nanotechnology in improving detection sensitivity, specificity and accuracy, the research progress of new nano-biosensors is introduced in detail, including SERS-based biosensors, electrochemical biosensors, magnetic nano-biosensors and colorimetric biosensors. Functions and challenges of nano-materials in construction of new nano-biosensors are discussed, which provides ideas for the development of various coronavirus biosensing technologies for nanomaterial researchers.

Rapid production and free distribution of a synthetic RNA material to support SARS-CoV-2 molecular diagnostic testing.

In response to the COVID-19 pandemic, the National Institute of Standards and Technology released a synthetic RNA material for SARS-CoV-2 in June 2020. The goal was to rapidly produce a material to support molecular diagnostic testing applications. This material, referred to as Research Grade Test Material 10169, was shipped free of charge to laboratories across the globe to provide a non-hazardous material for assay development and assay calibration. The material consisted of two unique regions of the SARS-CoV-2 genome approximately 4 kb nucleotides in length. The concentration of each synthetic fragment was measured using RT-dPCR methods and confirmed to be compatible with RT-qPCR methods. In this report, the preparation, stability, and limitations of this material are described.

A novel isothermal digital amplification system and its application for absolute quantification of respiratory infectious virus

Herein, we establish a novel isothermal digital amplification system termed digital nicking and extension chain reaction system-based amplification (dNESBA) by utilizing the isothermal NESBA technique and the newly developed miniaturized fluorescence monitoring system (mFMS). dNESBA enables parallel isothermal NESBA reactions in more than 10,000 localized droplet microreactors and read the fluorescence signals rapidly in 150 s by mFMS. This system could identify the genomic RNA (gRNA) extracted from target respiratory syncytial virus A (RSV A) as low as 10 copies with remarkable specificity. The practical applicability of dNESBA was also successfully verified by reliably detecting the gRNA in the artificial sputum samples with excellent reproducibility and accuracy. Due to the intrinsic advantages of isothermal amplifying technique including the elimination of the requirement of thermocycling device and the enhanced portability of the miniaturized read-out equipment, the dNESBA technique equipped with mFMS could serve as a promising platform system to achieve point-of-care (POC) digital molecular diagnostics, enabling absolute and ultra-sensitive quantification of various infectious pathogens even in an early stage.Copyright © 2023

Characterizing SARS-CoV-2 transcription of subgenomic and genomic RNAs during early human infection using multiplexed droplet digital PCR.

BACKGROUND: Control of SARS-CoV-2 (SCV-2) transmission requires understanding SCV-2 replication dynamics. METHODS: We developed a multiplexed droplet digital PCR (ddPCR) assay to quantify SCV-2 subgenomic RNAs (sgRNAs), which are only produced during active viral replication, and discriminate them from genomic RNAs (gRNAs). We applied the assay to specimens from 144 people with single nasopharyngeal samples and 27 people with >1 sample. Results were compared to qPCR and viral culture. RESULTS: sgRNAs were quantifiable across a range of qPCR cycle threshold (Ct) values and correlated with Ct values. The ratio of sgRNA:gRNA was stable across a wide range of Ct values, whereas adjusted amounts of N sgRNA to a human housekeeping gene declined with higher Ct values. Adjusted sgRNA and gRNA amounts were quantifiable in culture-negative samples, although levels were significantly lower than in culture-positive samples. Daily testing of 6 persons revealed that sgRNA is concordant with culture results during the first week of infection but may be discordant with culture later in infection. Further, sgRNA:gRNA is constant during infection despite changes in viral culture. CONCLUSIONS: Ct values from qPCR correlate with active viral replication. More work is needed to understand why some cultures are negative despite presence of sgRNA.

Expanding the Pathogen Panel in Wastewater Epidemiology to Influenza and Norovirus.

Since the start of the 2019 pandemic, wastewater-based epidemiology (WBE) has proven to be a valuable tool for monitoring the prevalence of SARS-CoV-2. With methods and infrastructure being settled, it is time to expand the potential of this tool to a wider range of pathogens. We used over 500 archived RNA extracts from a WBE program for SARS-CoV-2 surveillance to monitor wastewater from 11 treatment plants for the presence of influenza and norovirus twice a week during the winter season of 2021/2022. Extracts were analyzed via digital PCR for influenza A, influenza B, norovirus GI, and norovirus GII. Resulting viral loads were normalized on the basis of NH4-N. Our results show a good applicability of ammonia-normalization to compare different wastewater treatment plants. Extracts originally prepared for SARS-CoV-2 surveillance contained sufficient genomic material to monitor influenza A, norovirus GI, and GII. Viral loads of influenza A and norovirus GII in wastewater correlated with numbers from infected inpatients. Further, SARS-CoV-2 related non-pharmaceutical interventions affected subsequent changes in viral loads of both pathogens. In conclusion, the expansion of existing WBE surveillance programs to include additional pathogens besides SARS-CoV-2 offers a valuable and cost-efficient possibility to gain public health information.

Comparison of the methods for isolation and detection of SARS-CoV-2 RNA in municipal wastewater.

Introduction: Coronavirus SARS-CoV-2 is a causative agent responsible for the current global pandemic situation known as COVID-19. Clinical manifestations of COVID-19 include a wide range of symptoms from mild (i.e., cough, fever, dyspnea) to severe pneumonia-like respiratory symptoms. SARS-CoV-2 has been demonstrated to be detectable in the stool of COVID-19 patients. Waste-based epidemiology (WBE) has been shown as a promising approach for early detection and monitoring of SARS-CoV-2 in the local population performed via collection, isolation, and detection of viral pathogens from environmental sources. Methods: In order to select the optimal protocol for monitoring the COVID-19 epidemiological situation in region Turiec, Slovakia, we (1) compared methods for SARS-CoV-2 separation and isolation, including virus precipitation by polyethylene glycol (PEG), virus purification via ultrafiltration (Vivaspin®) and subsequent isolation by NucleoSpin RNA Virus kit (Macherey-Nagel), and direct isolation from wastewater (Zymo Environ Water RNA Kit); (2) evaluated the impact of water freezing on SARS- CoV-2 separation, isolation, and detection; (3) evaluated the role of wastewater filtration on virus stability; and (4) determined appropriate methods including reverse transcription-droplet digital PCR (RT-ddPCR) and real-time quantitative polymerase chain reaction (RT-qPCR) (targeting the same genes, i.e., RdRp and gene E) for quantitative detection of SARS-CoV-2 in wastewater samples. Results: (1) Usage of Zymo Environ Water RNA Kit provided superior quality of isolated RNA in comparison with both ultracentrifugation and PEG precipitation. (2) Freezing of wastewater samples significantly reduces the RNA yield. (3) Filtering is counterproductive when Zymo Environ Water RNA Kit is used. (4) According to the specificity and sensitivity, the RT-ddPCR outperforms RT-qPCR. Discussion: The results of our study suggest that WBE is a valuable early warning alert and represents a non-invasive approach to monitor viral pathogens, thus protects public health on a regional and national level. In addition, we have shown that the sensitivity of testing the samples with a nearer detection limit can be improved by selecting the appropriate combination of enrichment, isolation, and detection methods.

Nanotechnology for ultrafast nucleic acid amplification

Nucleic acid detection has been one of the most valued tools in point-of-care diagnostics from life science, agriculture, food safety and environmental surveillance, because of its high sensitivity, great specificity and simple operation. Since polymerase chain reactions (PCR) were discovered, more and more researchers attach importance to exploring ultrafast nucleic acid amplification methods for further expediting the process of detection and curbing infectious diseases' high spread rate, especially after the coronavirus disease 2019 (COVID-19) worldwide pandemic event. Nowadays, nanotechnology as one of the most cut-ting-edge technologies has aroused growing attention. In this review, we describe new advances in na-notechnology research for ultrafast nucleic acid amplification. We have introduced commonly used nanotechnologies, namely nanofluidics, nanoporous materials, nanoparticles and so on. Recent advances in these nanotechnologies for ultrafast sample pretreatments, accelerated enzymatic amplification and rapid heating/cooling processes was summarized. Finally, challenges and perspectives for the future applications of ultrafast nucleic acid amplification are presented.(c) 2022 Elsevier Ltd. All rights reserved.

Nanomaterials and Biosensing Technology for the SARS-CoV-2 Detection

The outbreak of corona virus disease 2019 (COVID-19) has aroused great attention around the world. SARS-CoV-2 possesses characteristics of faster transmission, immune escape, and occult transmission by many mutation, which caused still grim situation of prevention and control. Early detection and isolation of patients are still the most effective measures at present. So, there is an urgent need for new rapid and highly sensitive testing tools to quickly identify infected patients as soon as possible. This review briefly introduces general characteristics of SARS-CoV-2, and provides recentl overview and analysis based on different detection methods for nucleic acids, antibodies, antigens as detection target. Novel nano-biosensors for SARS-CoV-2 detection are analyzed based on optics, electricity, magnetism, and visualization. In view of the advantages of nanotechnology in improving detection sensitivity, specificity and accuracy, the research progress of new nano-biosensors is introduced in detail, including SERS-based biosensors, electrochemical biosensors, magnetic nano-biosensors and colorimetric biosensors. Functions and challenges of nano-materials in construction of new nano-biosensors are discussed, which provides ideas for the development of various coronavirus biosensing technologies for nanomaterial researchers.

Association between SARS-CoV-2 Viral Load and Patient Symptoms and Clinical Outcomes Using Droplet Digital PCR.

The association between nasopharyngeal (NP) SARS-CoV-2 viral loads and clinical outcomes remains debated. Here, we examined the factors that might predict the NP viral load and the role of the viral load as a predictor of clinical outcomes. A convenience sample of 955 positive remnant NP swab eluent samples collected during routine care between 18 November 2020 and 26 September 2021 was cataloged and a chart review was performed. For non-duplicate samples with available demographic and clinical data (i.e., non-employees), an aliquot of eluent was sent for a droplet digital PCR quantification of the SARS-CoV-2 viral load. Univariate and multivariate analyses were performed to identify the clinical predictors of NP viral loads and the predictors of COVID-19-related clinical outcomes. Samples and data from 698 individuals were included in the final analysis. The sample cohort had a mean age of 50 years (range: 19-91); 86.6% were male and 76.3% were unvaccinated. The NP viral load was higher in people with respiratory symptoms (p = 0.0004) and fevers (p = 0.0006). In the predictive models for the clinical outcomes, the NP viral load approached a significance as a predictor for in-hospital mortality. In conclusion, the NP viral load did not appear to be a strong predictor of moderate-to-severe disease in the pre-Delta and Delta phases of the pandemic, but was predictive of symptomatic diseases and approached a significance for in-hospital mortality, providing support to the thesis that early viral control prevents the progression of disease.

SARS-CoV-2 concentration in wastewater consistently predicts trends in COVID-19 case counts by at least two days across multiple WWTP scales.

Wastewater surveillance of SARS-CoV-2 has proven instrumental in mitigating the spread of COVID-19 by providing an economical and equitable approach to disease surveillance. Here, we analyze the correlation of SARS-CoV-2 RNA in influents of seven wastewater plants (WWTPs) across the state of South Carolina with corresponding daily case counts to determine whether underlying characteristics of WWTPs and sewershed populations predict stronger correlations. The populations served by these WWTPs have varying social vulnerability and represent 24% of the South Carolina population. The study spanned 15 months from April 19, 2020, to July 1, 2021, which includes the administration of the first COVID-19 vaccines. SARS-CoV-2 RNA concentrations were measured by either reverse transcription quantitative PCR (RT-qPCR) or droplet digital PCR (RT-ddPCR). Although populations served and average flow rate varied across WWTPs, the strongest correlation was identified for six of the seven WWTPs when daily case counts were lagged two days after the measured SARS-CoV-2 RNA concentration in wastewater. The weakest correlation was found for WWTP 6, which had the lowest ratio of population served to average flow rate, indicating that the SARS-CoV-2 signal was too dilute for a robust correlation. Smoothing daily case counts by a 7-day moving average improved correlation strength between case counts and SARS-CoV-2 RNA concentration in wastewater while dampening the effect of lag-time optimization. Correlation strength between cases and SARS-CoV-2 RNA was compared for cases determined at the ZIP-code and sewershed levels. The strength of correlations using ZIP-code-level versus sewershed-level cases were not statistically different across WWTPs. Results indicate that wastewater surveillance, even without normalization to fecal indicators, is a strong predictor of clinical cases by at least two days, especially when SARS-CoV-2 RNA is measured using RT-ddPCR. Furthermore, the ratio of population served to flow rate may be a useful metric to assess whether a WWTP is suitable for a surveillance program.

Rapid Assessment of SARS-CoV-2 Variant-Associated Mutations in Wastewater Using Real-Time RT-PCR.

Within months of the COVID-19 pandemic being declared on March 20, 2020, novel, more infectious variants of SARS-CoV-2 began to be detected in geospatially distinct regions of the world. With international travel being a lead cause of spread of the disease, the importance of rapidly identifying variants entering a country is critical. In this study, we utilized wastewater-based epidemiology (WBE) to monitor the presence of variants in wastewater generated in managed COVID-19 quarantine facilities for international air passengers entering the United Kingdom. Specifically, we developed multiplex reverse transcription quantitative PCR (RT-qPCR) assays for the identification of defining mutations associated with Beta (K417N), Gamma (K417T), Delta (156/157DEL), and Kappa (E154K) variants which were globally prevalent at the time of sampling (April to July 2021). The assays sporadically detected mutations associated with the Beta, Gamma, and Kappa variants in 0.7%, 2.3%, and 0.4% of all samples, respectively. The Delta variant was identified in 13.3% of samples, with peak detection rates and concentrations observed in May 2021 (24%), concurrent with its emergence in the United Kingdom. The RT-qPCR results correlated well with those from sequencing, suggesting that PCR-based detection is a good predictor for variant presence; although, inadequate probe binding may lead to false positive or negative results. Our findings suggest that WBE coupled with RT-qPCR may be used as a rapid, initial assessment to identify emerging variants at international borders and mass quarantining facilities. IMPORTANCE With the global spread of COVID-19, it is essential to identify emerging variants which may be more harmful or able to escape vaccines rapidly. To date, the gold standard to assess variants circulating in communities has been the sequencing of the S gene or the whole genome of SARS-CoV-2; however, that approach is time-consuming and expensive. In this study, we developed two duplex RT-qPCR assays to detect and quantify defining mutations associated with the Beta, Gamma, Delta, and Kappa variants. The assays were validated using RNA extracts derived from wastewater samples taken at quarantine facilities. The results showed good correlation with the results of sequencing and demonstrated the emergence of the Delta variant in the United Kingdom in May 2021. The assays developed here enable the assessment of variant-specific mutations within 2 h after the RNA extract was generated which is essential for outbreak rapid response.

Quantitative Assay of SARS-CoV-2 RNA and Level of Proinflammatory Protein Gene Transcripts in Peripheral Blood Leukocytes after a Novel Coronavirus Infection.

The possibility of finding persistent SARS-CoV-2 viral particles in human peripheral blood leukocytes after a novel coronavirus infection was shown. The results of droplet digital PCR showed that 19 of 24 examined subjects had from 4 to 555 copies of the Nsp4 SARS-CoV-2 gene in 5-6 months after infection. The presence of this transcript in peripheral blood leukocytes was associated with reduced expression of FOXP3 gene and increased level of RORγ gene mRNA. The copy number of the Nsp4 gene negatively correlated with the level of FOXP3 gene mRNA (r=-0.45; p=0.028), but showed a positive correlation with the DANCR long non-coding RNA (r=0.94; p<0.001). In SARS-CoV-2-positive healthy individuals, the level of TLR2, NLRP3, and IL1B gene transcripts was higher than in SARS-CoV-2-negative donors. The presence of SARS-CoV-2 in a persistent form is probably associated with impaired immunosuppression and the development of chronic inflammation in apparently healthy volunteers after a new coronavirus infection.

Prediction of Symptomatic Severe Acute Respiratory Syndrome Coronavirus 2 Infection by Quantitative Digital Polymerase Chain Reaction Normalized to International Units.

Although numerous studies have evaluated severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection using cycle threshold (Ct) values as a surrogate of viral ribonucleic acid (RNA) load, few studies have used standardized, quantitative methods. We validated a quantitative SARS-CoV-2 digital polymerase chain reaction assay normalized to World Health Organization International Units and correlated viral RNA load with symptoms and disease severity.

Accurate quantification of SARS-CoV-2 RNA by isotope dilution mass spectrometry and providing a correction of reverse transcription efficiency in droplet digital PCR.

The novel coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has infected more than 505 million confirmed cases, including over 6 million deaths. Reference materials (RMs) of SARS-CoV-2 RNA played a crucial role in performance evaluation and quality control of testing laboratories. As the potential primary characterization method of RMs, reverse transcription digital PCR (RT-dPCR) measures the copy number of RNA, but the accuracy of reverse transcription (RT) efficiency has yet to be confirmed. This study established a method of enzymatic digestion followed by isotope dilution mass spectrometry (IDMS), which does not require an RT reaction, to quantify in vitro-transcribed SARS-CoV-2 RNA. RNA was digested to nucleotide monophosphate (NMP) within 15 min and analyzed by IDMS within 5 min. The consistency among the results of four different NMPs demonstrated the reliability of the proposed method. Compared to IDMS, the quantitative result of RT-dPCR turned out to be about 10% lower, possibly attributed to the incompleteness of the reverse transcription process. Therefore, the proposed approach could be valuable and reliable for quantifying RNA molecules and evaluating the RT efficiency of RT-based methods.

Efficiency and sensitivity optimization of a protocol to quantify indoor airborne SARS-CoV-2 levels.

BACKGROUND: Development of methodologies to quantify airborne micro-organisms is needed for the prevention and control of infections. It is difficult to conclude which is the most efficient and sensitive strategy to assess airborne SARS-CoV-2 RNA levels due to the disparity of results reported in clinical settings. AIM: To improve our previously reported protocol of measuring SARS-CoV-2 RNA levels, which was based on bioaerosol collection with a liquid impinger and RNA quantification with droplet digital polymerase chain reaction (ddPCR). METHODS: Air samples were collected in COVID-19 patient rooms to assess efficiency and/or sensitivity of different air samplers, liquid collection media, and reverse transcriptases (RT). FINDINGS: Mineral oil retains airborne RNA better than does hydrophilic media without impairing integrity. SARS-CoV-2 ORF1ab target was detected in 80% of the air samples using BioSampler with mineral oil. No significant differences in effectiveness were obtained with MD8 sampler equipped with gelatine membrane filters, but the SARS-CoV-2 copies/m3 air obtained with the latter were lower (28.4 ± 6.1 vs 9 ± 1.7). SuperScript II RT allows the detection of a single SARS-CoV-2 genome RNA molecule by ddPCR with high efficiency. This was the only RT that allowed the detection of SARS-CoV-2 N1 target in air samples. CONCLUSION: The collection efficiency and detection sensivity of a protocol to quantify SARS-CoV-2 RNA levels in indoor air has been improved in the present study. Such optimization is important to improve our understanding of the microbiological safety of indoor air.

An integrated digital PCR system with high universality and low cost for nucleic acid detection.

Digital PCR is the most advanced PCR technology. However, due to the high price of the digital PCR analysis instrument, this powerful nucleic acid detection technology is still difficult to be popularized in the general biochemistry laboratory. Moreover, one of the biggest disadvantages of commercial digital PCR systems is the poor versatility of reagents: each instrument can only be used for a few customized kits. Herein, we built a low-cost digital PCR system. The system only relies on low-cost traditional flat-panel PCR equipment to provide temperature conditions for commercial dPCR chips, and the self-made fluorescence detection system is designed and optically optimized to meet a wide range of reagent requirements. More importantly, our system not only has a low cost (<8000 US dollars) but also has a much higher universality for nucleic acid detection reagents than the traditional commercial digital PCR system. In this study, several samples were tested. The genes used in the experiment were plasmids containing UPE-1a fragment, TP53 reference DNA, hepatitis B virus DNA, leukemia sample, SARS-COV-2 DNA, and SARS-COV-2 RNA. Under the condition that DNA can be amplified normally, the function of the dPCR system can be realized with simpler and low-price equipment. Some DNA cannot be detected by using the commercial dPCR system because of the special formula when it is configured as the reaction solution, but these DNA fluorescence signals can be clearly detected by our system, and the concentration can be calculated. Our system is more applicable than the commercial dPCR system to form a new dPCR system that is smaller and more widely applicable than commercially available machinery.